This banjo has a 12″ walnut rim, 1/2″ thick with a 1/4″ round brass tone hoop on top and a Renaissance head. Total pot height is 3-1/8″ or so. The tension hoop is a Van Eps style with holes instead of notches. The neck has a 1-3/8″ wide Corian nut, ebony fretboard with scoop, EVO fretwire and brass position dots. There is a two way truss rod accessed through the heel as on all of my banjos. The tuners are Gotoh raw brass. All the rest of the brass hardware came from Balsam Banjo Works except the tailpiece. The peghead overlay is a piece of walnut that I got in a box full of short pieces. It is darker than the rest of the walnut on this banjo and has some figure in the grain. The scale length is 25-1/2″. To see a video demo of this banjo please follow the link below.