Base price for necks is $325 which includes a Stew-Mac Hot Rod two way truss rod and nickel-silver fret wire but not tuners. I can do any scale length and nut width, and I can cut the heel to fit any size rim. My necks are usually made from 2 or 3 pieces of wood, if you want a one piece neck let me know and I will see what I have on hand. I can make Vega or Dobson heels, and full-fret or scooped fretboards, all are included in base price. 4, 5 or 6 string necks all cost the same. The base price wood is cherry, plain maple or ash with a jatoba, hickory or hop-hornbeam fretboard. Paddle or figure 8 shaped pegheads are included in the base price and other shapes will cost $10 or $20 depending on the amount of work to make them. Below is a list of the charges for more expensive woods, and I am also happy to work with most other types of wood if you send me the material. The exception is cocobolo, which made me sneeze for some reason the one time I used it on a custom neck. Brass front or side dots are included in base price. Any peghead overlay wood that I have on hand is included in the base price.
Curly maple, mahogany or walnut +$20
Center stripe +$10
Ebony fretboard +$30
Rosewood fretboard +$20
Persimmon, granadillo or pau ferro fretboard +$10
Rocklite Ebano or Sundari fretboard $30
Radiused fretboard +$30
Bound fretboard (wood binding) +$30
Both front and side dots (one or the other is included in base price)+$10
Wood dots, species of your choice +$10
Pearl or other dots + cost of material
Other pre-cut inlays +$10 to install, plus cost of inlay shape
EVO Gold fret wire +$10
Tru Oil finish +$20
Bone nut and pip +$10
Spikes +$5 each
I usually have some rims on hand and I am happy to make custom rims too. I only make block rims. Cherry, maple or ash cost $80 for an 11″ or smaller rim up to 3″ high and with 1/2″ to 3/4″ wall thickness. Over 3″ high adds $10, 12″ rims add $10. Walnut, mahogany or curly maple cost $10 extra. I can add a rim cap from any of the rim woods for $30. I can turn one of my rims to fit your tone ring and flange for $10 per fitment but you’ll have to send them to me so I have them in hand to fit properly. I have turned rims as large as 16″(which is the biggest I can fit on my lathe) and as small as 8″. Send me an email if you’d like to know what I currently have in stock, or to place a custom order.
I have begun making my own Van Eps style tension hoops from brass or aluminum and will be happy to make custom hoops for $50 +/- depending on the size and material. I can also supply a hoop without the holes for $40+/-, if you’d like to make your own holes or notches. Send me an email to arrange details.
This kind of armrest was originally developed by Jason Romero of Romero Banjos. I can make wood armrests to fit any banjo, I just need a couple of measurements. Price is $30 for cherry, ash or plain maple, including a Tru Oil finish. If you’d like to do your own finishing just let me know, that will save time in getting your armrest ready to ship and will save you $5. There is a $5 extra charge for mahogany, walnut or curly maple. The armrest is held on by an aluminum or brass bracket that goes around the inside of two hooks and has a threaded hole for the screw. Weight is generally in the 1 to 2 ounce range for cherry or walnut, I haven’t weighed the ones I have made from other woods. Shipping is $5 anywhere in the US, other areas please inquire.